跳转到内容

20261009-1114-air-hub-mini-wroom-module Use the ESP32-C6-WROOM-1 module on Air Hub Mini

  • status: completed
  • createdAt: 2026-10-09 11:14
  • approvedAt: 2026-10-09 11:14 (owner: "用ESP32-C6-WROOM-1模组")
  • relatedTask: 20261009-1114-air-hub-mini-wroom-module

Air Hub Mini (AH-21, spec R1.4) uses ESP32-C6-MINI-1: 22 GPIO, 4 MB flash, −40…+85 °C (N4) or −40…+105 °C (H4), 13.2 × 16.6 mm. ESP32-C6-WROOM-1 (Espressif module data sheet): 23 GPIO (IO0–IO13, IO15, IO18–IO23, TXD0, RXD0; IO14 is not brought out), flash 4 / 8 / 16 MB, −40…+85 °C only, 18.0 × 25.5 × 3.1 mm, PCB antenna (WROOM-1U has an external-antenna connector). LCSC 2026-10-09: ESP32-C6-WROOM-1-N8 3.07 USD @1.3k (MINI-1-N4 2.85).

Replace the module in every Air Hub Mini reference with ESP32-C6-WROOM-1-N8: spec §1, §2.1, §2.2 H16, §2.3 AH-21, §2.5, AIR-O-15; design appendix §2.1 H, §3 diagram, §3.1; reference-board §2.4 (new pin table: IO14 is unavailable, UART CTS moves to IO10; two pins spare) and §6.1 (+0.2 USD); guide quotation line; evaluation §8.5; line spec, index, product plan and open questions wording. Air Hub and Air Hub Pro keep ESP32-C6-MINI-1.

  • WROOM-1 gives one more GPIO than MINI-1, not many more; the gain is mainly the 8 MB flash.
  • No 105 °C version; the Mini is −40…+85 °C.
  • The module is larger (18.0 × 25.5 mm).

About 10 documentation files.

Keep MINI-1 (smaller, 105 °C option, 4 MB flash).

  • 2026-10-09 11:14: approved in the request ("用ESP32-C6-WROOM-1模组").